Dell D19M - 6 System Setup Options

Table 10. — Advanced (continued)
USB Emulation Allows you to enable or disable the USB emulation.
Default: Enabled
SW Guard Extensions (SGX) Allows you to enable or disable the SW guard extensions (SGX).
Default: Disabled
USB Configuration Allows you to enable or disable the USB ports.
Front USB Ports: Enabled
Rear USB Ports: Enabled
Power Options Allows you to modify the power options.
Wake up by Integrated LAN/WLAN: Disabled
AC Recovery: Power Off
Deep Sleep Control: Enabled in S4 and S5 modes
Auto Power On: Disabled
Auto Power On Mode: Allows you to select the day (Default: disabled)
Auto Power On Date: Allows you to select the date
Auto Power On Time: Allows you to select the time
SMART Settings Allows you to enable to enable or disable the SMART feature.
Default: Disabled
Table 11. — Security
Unlock Setup Status Allows you to lock or unlock the system setup.
Default: Unlocked
Admin Password Status Displays the status indicating if the Administrator password is
set.
Default: Not Set
System Password Status Displays the status indicating if the System password is set.
Default: Not Set
HDD Password Status Displays the status indicating if the System password is set.
Default: Not Set
Asset Tag Allows you to enter your service tag.
Admin Password Allows you to create an admin password.
HDD Password Allows you to create an HDD password.
System Password Allows you to create a system password.
Password Change Allows you to set the option to change password.
Default: Permitted
Firmware TPM Allows you to enable or disable the Firmware TPM.
Default: Disabled
HDD Protection Allows to modify the HDD protection feature.
Default: Disabled
System Setup Options 43