System setup options
NOTE: Depending on the and its installed devices, the items listed in this section may or may not appear.
General screen options
This section lists the primary hardware features of your computer.
Option Description
System
Information
● System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date,
Manufacture Date, and the Express Service Code.
● Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels
Mode, Memory Technology, DIMM 1 Size, DIMM 2 Size.
● PCI information: Displays Slot 1, Slot 2, and Slot 3.
● Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed,
Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable,
and 64-Bit technology.
● Device Information: Displays Primary Hard Drive, SATA-0, SATA-1, SATA-2, SATA-3, LOM MAC
Address, Video Controller, Audio Controller.
Boot Sequence
Boot Sequence Allows you to specify the order in which the computer attempts to find an
operating system. To change the boot order, select the device that you want to
change in the list, which is available on the right-hand side. After you select the
device, click up or down arrows or use your keyboard Page Up or Page Down
keys to change the boot options order. You can also select or de-select from the
list using the check-boxes available on the left hand side. You should enable the
Legacy Option ROMs to setup the Legacy boot mode. This Legacy boot mode is
not allowed when you enable the Secure Boot. The options are:
● Boot Sequence - By default, the Windows Boot Manager check box is selected.
NOTE: The default option might differ based on the operating system of
your computer.
● Boot List Option - The list options are Legacy and UEFI. By default, the option
UEFI is selected.
NOTE: The default option might differ based on the operating system of
your computer.
● Add Boot Option - Enables you to add a boot option.
● Delete Boot Option - Enables you to delete an existing boot option.
● View - Enables you to view the current boot option in the computer.
● Restore Settings - Restores the default settings of the computer.
● Save Settings - Saves the settings of the computer.
● Apply - Enables you to apply the settings.
●
Exit - Exits and starts the computer.
Boot List Options Allows you to change the boot list option:
● Legacy
● UEFI (enabled by default)
Advanced Boot
Options
This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is
disabled.
Date/Time Allows you to change the date and time.
System Setup Options 45
To Next Page
Loading...
