Dell D19M - Memory Module; Removing the Memory Module; Installing the Memory Module; Expansion Card

Memory modules
Removing the memory module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. cover
b. bezel
3. Open the front bezel door.
4. To remove the memory module:
a. Push the memory module retention tabs on both sides of the memory module.
b. Lift the memory module from the memory module connector on the system board.
Installing the memory module
1. Align the notch on the memory module with the tab on the memory module connector.
2. Insert the memory module into the memory module socket.
3. Press the memory module until the memory module retention tabs click into place.
4. Close the front panel door.
5. Install the:
a. cover
b. bezel
6. Follow the procedure in After working inside your computer.
Expansion card
Removing the PCIe expansion card
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. cover
b. bezel
3. Open the front panel door.
4. To remove the PCIe expansion card:
a. Pull the release latch to unlock the PCIe expansion card [1].
b. Push the release tab [2] and lift the PCIe expansion card out of the computer [3].
NOTE: The release tab is at the base of the expansion card.
Disassembly and reassembly 15