18 Setting Up and Using Your Computer
Connecting a USB Printer
NOTE: You can connect USB devices while the computer is turned on.
1
Complete the operating system setup, if you have not already done so.
2
Attach the USB printer cable to the USB connectors on the computer and the printer. The USB
connectors only fit into the ports when correctly oriented.
3
Turn on the printer and then turn on the computer. If the
Add New Hardware Wizard
window
appears, click
Cancel
.
4
Install the printer driver, if necessary. See the documentation that came with your printer.
Connecting to the Internet
NOTE: ISPs and ISP offerings vary by country.
To connect to the Internet, you need a modem or network connection and an Internet service provider
(ISP), such as AOL or MSN. Your ISP will offer one or more of the following Internet connection options:
• Dial-up connections that provide Internet access through a telephone line. Dial-up connections are
considerably slower than DSL and cable modem connections.
1 USB connector on
computer
2 USB printer cable 3 USB connector on printer
1
23
To Next Page
Loading...
Need help?
General