Removing and Installing Parts 91
3
To replace the cover:
a
Align the bottom of the cover with the hinge tabs located along the bottom edge of the computer.
b
Using the hinge tabs as leverage, rotate the cover downward to close it.
c
Press the cover down until it snaps into place.
d
Ensure that the cover is seated correctly before moving the computer.
NOTICE: To connect a network cable, first plug the cable into the network port or device, and then plug it into the
computer.
4
Connect your computer and devices to electrical outlets, and then turn them on.
To Next Page
Loading...
Need help?
General