Figure 11. Removing and installing hard drive carrier from the hard drive cage
1. hard drive carrier 2. hard drive
3. retention clips (2) 4. hard drive cage
Next steps
1. Install the hard drive carrier into the hard drive cage.
2. Install the hard drive cage.
3. Reconnect the power and data cables to the hard drives and optical drive in the hard drive cage.
4. Install the bezel.
5. Reconnect the peripherals disconnected from the control panel assembly.
6. Follow the procedure listed in After working inside your system.
Related Tasks
Removing the bezel
Removing the hard drive cage
Installing a hard drive carrier into the hard drive cage
Installing the hard drive cage
Installing the bezel
51
To Next Page
Loading...
