EasyManua.ls Logo

Dell E75S001 - Chapter 2: Poweredge R750 Xs System Overview; Front View of the System

Dell E75S001
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PowerEdge R750xs system overview
The PowerEdge R750xs system 2S, 2U system that supports:
Up to two 3
rd
Generation Intel Xeon Scalable processors with up to 32 cores per processor.
16 DDR4 DIMM slot
Two AC or DC power supply units
16 x 2.5-inch SAS/ SATA + 8 x 2.5-inch NVMe drives.
16 x 2.5-inch SAS/ SATA drives.
12 x 3.5-inch SAS/ SATA + 2 x 2.5-inch SAS/ SATA or NVMe rear drives.
8 x 2.5-inch SAS/ SATA drives.
8 x 2.5-inch NVMe drives.
8 x 3.5-inch SAS/ SATA drives.
NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe
PCIe SSD User's Guide at https://www.dell.com/support > Browse all Products > Data Center Infrastructure >
Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals
and Documents.
NOTE: All instances of SAS, SATA and NVMe drives are referred to as drives in this document, unless specified otherwise.
NOTE: For more information, see the Dell EMC PowerEdge R750xs Technical Specifications on the product documentation
page.
Topics:
Front view of the system
Rear view of the system
Inside the system
System information label
Rail sizing and rack compatibility matrix
Locating the Express Service Code and Service Tag
Front view of the system
Figure 1. Front view of 16 x 2.5-inch SAS/SATA + 8 x 2.5-inch NVMe drive system
2
8 PowerEdge R750xs system overview

Table of Contents

Other manuals for Dell E75S001

Related product manuals