Dell EMC ML3E User Manual

If the symbol is... It means...
Risk of hand pinching, can trap hands, fingers and cause serious injury.
Keep hands clear during operation (L012).
The weight of this part or unit is between 18.1 and 33.6 kg (40 and 74 lb). It
takes two persons to safely lift this part or unit. (C009)
The weight of this part or unit is between 33.6 and 46.3 kg (74 and 102 lb).
It takes three persons to safely lift this part or unit. (C010)
A hazardous condition due to the unit's susceptibility to electrostatic
discharge.
Possible safety hazards
Possible safety hazards to the operation of this product are:
Electrical
An electrically charged frame can cause serious electrical shock.
Mechanical
Hazards (for example, a safety cover missing) are potentially harmful to people.
Chemical
Do not use solvents, cleaners, or other chemicals that are not approved for use on this product.
Before the library is used, repair any of the preceding problems.
Class I laser product
Before the library is used, review the following laser safety information.
xvi Dell EMC ML3 Tape Library: User's Guide

Dell EMC ML3E Specifications

General

Product Type	Tape Library
Number of Drives	Up to 3
Interface Type	SAS
Operating Humidity	20% to 80% (non-condensing)
Non-operating Humidity	5% to 95% (non-condensing)
Drive Types	LTO-6, LTO-7, LTO-8
Tape Technology	LTO Ultrium
Form Factor	Rackmount
RAID Support	Not Applicable
Max Data Transfer Rate	Up to 300 MB/s (native)
Operating Temperature	10°C to 35°C
Non-operating Temperature	-40°C to 60°C
Power Supply	Dual redundant power supplies