Universal rack connector
A rackmount kit has four universal rack connectors as part of the kit. Each connector has two
sides - one side is for round-hole racks, and the other side is for square-hole racks. The
square-hole side might be painted. The connectors are installed from the inside of the rack out,
and the rails are hooked onto them. See Figure 37 on page 43.
Unload
Prepare the tape cartridge for removal from the drive.
User The User role is an interchangeable term corresponding to the Monitor role. The User role has
viewing privileges to the unit, but is not able to make configuration changes.
Utilities
Utility programs.
Utility programs
A computer program in general support of the processes of a computer. For instance, a diagnostic
program.
UV Under voltage.
V
VOLSER
Volume serial number.
Volume
A certain portion of data, together with its data carrier, that can be handled conveniently as a
unit.
VPD Vital product data. The information that is contained within the tape drive that requires
nonvolatile storage that is used by functional areas of the drive, and information that is required
for manufacturing, RAS, and engineering.
W
Web UI, Web GUI, Web User Interface
Management GUI
Word A character string that is convenient for some purpose to consider as an entity.
Worldwide Node Name (WWNN)
A unique character string that identifies Fibre Channel Host Bus adapters (HBA).
WORM
Write Once, Read Many.
Write Write command.
WT World trade.
WWCID
Worldwide Cartridge Identifier.
WWN Worldwide Name.
WWNN
Worldwide Node Name.
WWPN
Worldwide port name.
X
XR External register.
172 Dell EMC ML3 Tape Library: User's Guide
To Next Page
Loading...
Need help?
General