Supported interfaces
This tape library supports the Gigabit Ethernet interface in either auto negotiation or fixed modes of 10
Mbps, 100 Mbps, and 1 Gbps by using half or full duplex. The library supports the following TCP/IP
protocols:
IPv4 and IPv6 support
This tape library supports Internet Protocol (IP) addresses in both IPv4 and IPv6 format. Both the
integrated management console (IMC) and the management GUI allow the definition of IPv4 and
IPv6 addresses. The key proxy determines the IP version that is used and presents the correct IP
address and parameters to the IP Stack.
Simple Network Management Protocol (SNMP)
SNMP traps are supported for drive and library events. SNMP management query functions are
supported by using a standard Management Information Block (MIB).
Hyper Text Transfer Protocol (HTTP)
An embedded web server provides a management GUI for library management and query
capabilities.
Secure Socket Layer (SSL)
The tape library supports SSL, a protocol for transmitting private documents through the internet.
Key Management Interoperability Protocol (KMIP)
Used for communicating with the IBM
®
Security Lifecycle Key Manager and other security key
management software.
Simple Mail Transfer Protocol (SMTP)
The tape library supports SMTP for sending email alerts.
Network Time Protocol (NTP)
The tape library supports NTP for external time-and-date synchronization.
Lightweight Directory Access Protocol (LDAP)
The tape library supports LDAP for centralized authentication.
Domain Name System (DNS)
The tape library supports DNS for flexible IP addressing.
Dynamic Host Configuration Protocol (DHCP)
The library supports DHCP for automatically providing an Internet Protocol (IP) host with its IP
address and other related configuration information, such as the subnet mask and default
gateway.
Overview 21
To Next Page
Loading...
Need help?
General