5 main power interposer board link connector
Removing the GPU power interposer board
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Remove the power supply units (PSUs).
4 Remove the system board.
Steps
1 Lift the release pin, and slide the power interposer board (PIB) to release the board from the guide pin.
2 Disengage the GPU PIB from the guide pins and lift the PIB out of the system.
Figure 97. Removing the GPU power interposer board
Next step
Install the GPU PIB.
Installing the GPU power interposer board
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Align the guide slots on the GPU PIB with the guide pins on the chassis.
2 Slide the GPU PIB until the release pin locks into place and secures the PIB.
Installing and removing system components
151
To Next Page
Loading...
