Figure 29. Removing a 3.5 inch drive adapter from a 3.5 inch drive carrier
Next step
Install the 3.5 inch drive carrier or install the 3.5 inch drive adapter into the 3.5 inch drive carrier.
Related link
Removing the front bezel
Removing a drive carrier
Installing a drive carrier
Installing a 3.5 inch drive adapter into the 3.5 inch drive carrier
Installing a 3.5 inch drive adapter into the 3.5 inch drive carrier
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Install the 2.5 inch drive into the 3.5 inch drive adapter.
Steps
1 Insert the 3.5 inch drive adapter into the 3.5 inch drive carrier with the connector end of the drive toward the back of the 3.5 inch
drive carrier.
2 Align the screw holes on the 3.5 inch drive adapter with the holes on the 3.5 inch drive carrier.
3 Using the Phillips #1 screwdriver, secure the 3.5 inch drive adapter to the 3.5 inch carrier.
Installing and removing system components
81
To Next Page
Loading...
