Dell EMC PowerEdge T640 - Installing the Cooling Fan Assembly

Figure 44. Removing the cooling fan assembly
Next step
Install the cooling fan assembly.
Related link
Installing the cooling fan assembly
Installing the cooling fan assembly
Prerequisite
Follow the safety guidelines listed in Safety instructions.
CAUTION
: Ensure that the cables inside the system are correctly installed and retained by the cable retention bracket before
installing the cooling fan assembly. Incorrectly installed cables may get damaged.
Steps
1 Align the guide rails on the cooling fan assembly with the standos on the system.
2 Lower the cooling fan assembly into the system until the cooling fan connectors engage with the connectors on the system board.
3 Press the release levers to lock the cooling fan assembly into the system.
Installing and removing system components
99