8. Select Yes at the Save Configuration and Reset? option.
After the switch reloads, Secure Boot mode is enabled. You can only use signed binaries such as ONIE, DIAG OS, FW updater, or
the networking operating system (NOS).
Disable BIOS secure boot
The Secure Boot configuration page in the BIOS Setup menu is password protected. On some switches, Secure Boot mode is
enabled by default in the BIOS but you can disable it from the BIOS menu.
1. Enter the BIOS password. The default password is the switch service tag plus an exclamation mark; for example, xxxxxx!.
After you enter the password, you enter the Main tab of the BIOS user interface.
Secure boot
41
To Next Page
Loading...
Need help?
General