Specifications
This section lists the Z9432F-ON switch specifications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).
NOTE: For RoHS information, see Restricted Material Compliance.
Topics:
• Chassis physical design
• IEEE standards
• Agency compliance
• USA Federal Communications Commission statement
• European Union EMC directive conformance statement
• Japan VCCI compliance for class A equipment
•
Safety standards and compliance agency certifications
• Electromagnetic compatibility
• Product recycling and disposal
Chassis physical design
Table 5. Chassis physical design
Parameter Specifications
Height 43 mm (1.693 inches)
Width 438.5 mm (17.26 inches)
Depth 550 mm (21.65 inches)
● PSU handle 29.3 mm (1.15 in)
● PSU latch 34.6 mm (1.37 in)
● Fan tray handle 25.0 mm (0.99 in)
Chassis weight with factory-installed components
● 11.78 kg (2 PSUs and 7 fans)
● 25.97 lbs (2 PSUs and 7 fans)
Rack clearance required
● Front: 12.7 cm (5 inches)
● Back: 12.7 cm (5 inches)
Table 6. Environmental parameters
Parameter Specifications
Operating temperature 0°C–45°C (32°F–113°F) continuously
NOTE: Reduce maximum temperature by 1°C/125 meters
(1°F/228 ft) above 950 meters (3,117 ft).
Operating humidity 5% – 90% (RH), noncondensing
Storage temperature -40°C–70°C (-40°F – 158°F)
Storage humidity 5% to 90%, noncondensing
Maximum thermal output 1362 W = 4647.3 BTU/Hr
10
Specifications 47
To Next Page
Loading...
Need help?
General