EasyManua.ls Logo

Dell EMC PowerSwitch Z9432F-ON - Japan VCCI Compliance for Class a Equipment; Safety Standards and Compliance Agency Certifications

Dell EMC PowerSwitch Z9432F-ON
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dahlienweg 19
66265 Heusweiler
Germany
Tel: +49 172 6802630
Email: EMEA Central Sales
Japan VCCI compliance for class A equipment
Figure 3. Japan: VCCI compliance for class A equipment
This is Class A product based on the standard of the Voluntary Control Council For Interference by Information Technology
Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs,
the user may be required to take corrective actions.
NOTE:
Use the AC power cords with Dell EMC equipment only. Do not use Dell EMC AC power cords with any
unauthorized hardware.
Figure 4. Japan: warning label
Safety standards and compliance agency
certifications
CUS UL 60950-1, 2nd Edition
Meets or exceeds Hi Pot and Ground Continuity testing per UL 60950-1.
CSA 60950-1-03, 2nd Edition
EN 60950-1, 2nd Edition
EN 60825-1, 1st Edition
EN 60825-1 Safety of Laser ProductsPart 1: Equipment Classification Requirements and Users Guide
EN 60825-2 Safety of Laser ProductsPart 2: Safety of Optical Fibre Communication Systems
FDA Regulation 21CFR 1040.10 and 1040.11
IEC 60950-1, 2nd Ed, including all National Deviations and Group Differences
IEC 62368-1
50
Specifications

Table of Contents

Related product manuals