Replacing the display hinges
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Slide the hinges under the latches on the display back-cover.
2 Align the screw holes on the display hinges with the screw holes on the display
back-cover.
3 Replace the screws that secure the display hinges to the display back-cover.
Post-requisites
1 Replace the display panel.
2 Replace the display bezel.
3 Replace the display assembly.
4 Replace the system board.
5 Replace the heat-sink assembly.
6 Replace the IO board.
7 Replace the wireless card.
8 Replace the memory module.
9 Follow the procedure from step 3 to step 5 in “Replacing the hard drive”.
10 Follow the procedure from step 3 to step 7 in “Replacing the base cover”.
44
Replacing the display hinges 102
To Next Page
Loading...
