Removing the touch pad
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the battery.
2 Follow the procedure from step 1 to step 3 in “Removing the optical drive”.
3 Remove the keyboard.
4 Follow the procedure from step 1 to step 5 in “Removing the base cover”.
5 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
6 Remove the memory module.
7 Remove the wireless card.
8 Remove the IO board.
9 Remove the heat-sink assembly.
10 Remove the system board.
Procedure
1 Peel the tape off the touch-pad bracket.
31
Removing the touch pad 70
To Next Page
Loading...
