Dell Inspiron 22-3280 - 17 Removing the Antennas; Prerequisites; Procedure

Removing the antennas
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the stand.
2. Remove the back cover.
3. Remove the system-board shield.
4. Remove the wireless card.
Procedure
1. Note the routing of the antenna cables, and remove it from the routing guides on the display-assembly base.
2. Remove the two screws (M2x2.5) that secure the antennas to the display-assembly base.
3. Peel off the antennas from the display-assembly base.
17
Removing the antennas 35