Dell Inspiron 22-3280 - 28 Replacing the Camera; Procedure

Replacing the camera
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1. Place the camera and camera bracket in the slot on the retractable-camera assembly and snap it in place.
2. Align the screw holes on the camera-assembly cover with the screw holes on the retractable-camera assembly.
3. Replace the three screws (M3x5) that secure the camera-assembly cover to the retractable-camera assembly.
4. Press the top of the retractable-camera assembly to retract the retractable camera.
28
Replacing the camera 49