Dell Inspiron 22-3280 - 19 Removing the Solid-State Drive;Intel Optane Memory Module; Prerequisites; Procedure

Removing the solid-state drive/Intel Optane
memory module
You need to disable the Intel Optane memory before removing Intel Optane memory module from your computer. For more information
about disabling the Intel Optane memory, see Disabling Intel Optane memory.
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the stand.
2. Remove the back cover.
3. Remove the system-board shield.
Procedure
1. Locate the solid-state drive/Intel Optane memory on the system board.
2. Remove the screw (M2x3) that secures the solid-state drive/Intel Optane memory to the system board.
3. Slide and remove the solid-state drive/Intel Optane memory from the M.2 slot.
19
Removing the solid-state drive/Intel Optane memory module 37