Removing the fan
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the stand.
2. Remove the back cover.
3. Remove the system-board shield.
Procedure
1. Disconnect the fan cable from the system board and remove it from the routing guides.
2. Remove the three screws (M2x2.5) that secure the fan to the display-assembly base.
3. Lift and slide the fan from under the heat sink.
31
Removing the fan 53
To Next Page
Loading...
