Replacing the Fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the fan with the screw holes on the computer
base.
2 Replace the screws that secure the fan to the computer base.
3 Adhere the Mylar over the heat sink and fan.
4 Connect the fan cable to the system board.
Post-requisites
1 Replace the computer base.
2 Replace the base cover.
52
To Next Page
Loading...
