Dell Inspiron 23 - Replacing the System Board; Procedure; Post-requisites

Replacing the Control-Buttons
Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
Place the control-buttons board into the control-buttons board bracket in
such a way that the control-buttons board fits in the slot on the display bezel.
Post-requisites
1 Replace the display panel.
2 Replace the power-button module.
3 Replace the microphones.
4 Replace the camera.
5 Replace the stand assembly.
6 Replace the back cover.
7 Replace the computer base.
8 Replace the base cover.
91