Dell Inspiron 23 - Replacing the Camera; Procedure; Post-Requisites

Replacing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the camera into the camera bracket.
2 Connect the camera cable to the camera.
3 Align the screw holes on the camera assembly with the screw holes on
the display bezel.
4 Replace the screws that secure the camera assembly to the display bezel.
5 Adhere the Aluminium foil tape that secures the camera assembly to the
display bezel.
Post-requisites
1 Replace the back cover.
2 Replace the computer base.
3 Replace the base cover.
67