Dell Inspiron 23 - Replacing the Display Panel; Procedure; Post-Requisites

Replacing the Display Panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Place the display panel on a flat and clean surface.
2 Align the screw holes on the display-panel side-brackets with the screw
holes on the display panel.
3 Replace the screws that secure display-panel side-brackets to the display
panel.
4 Align the screw holes on the display-panel side-brackets with the screw
holes on the display bezel and place the display panel to the display
bezel.
NOTE: Make sure that no cables are under the display panel.
5 Slide the flex cables into the connectors on the display panel and press
down on the connector latches to secure the cables.
6 Replace the screws that secure the display panel to the display bezel.
7 Replace the screws that secure the display-panel bracket to the display
bezel.
Post-requisites
1 Replace the power-button module.
2 Replace the stand assembly.
3 Replace the microphones.
4 Replace the camera.
5 Replace the back cover.
6 Replace the computer base.
7 Replace the base cover.
88