Dell Inspiron 23 - Removing the Power-Supply Unit; Prerequisites

Replacing the Converter Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the converter board with the screw holes on the
display bracket.
2 Replace the screws that secure the converter board to the display
bracket.
3 Connect the converter-board cable to the converter board.
4 Connect the display-backlight cable to the converter board.
Post-requisites
1 Replace the back cover.
2 Replace the computer base.
3 Replace the base cover.
73