Dell Inspiron 23 - Removing the Processor Heat-Sink; Prerequisites

Removing the Stand Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the computer base.
3 Remove the back cover.
4 Remove the camera.
5 Remove the microphones.
Procedure
1 Disconnect the converter-board cable from the converter board.
2 Disconnect the display-backlight cable from the converter board.
3 Gently release the antennas from the alignment posts on the display
bezel.
77