Removing the Control-
Buttons Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the computer base.
3 Remove the back cover.
4 Remove the stand assembly.
5 Remove the camera.
6 Remove the microphones.
7 Remove the power-button module.
8 Remove the display panel.
Procedure
1 Pry the control-buttons bracket to release the control-buttons board
from the tabs.
89
To Next Page
Loading...
