POST Behavior
• 0 seconds (default)
• 5 seconds
• 10 seconds
Full Screen Logo Display the full screen logo if your image matches the screen resolution.
By default, Enable Full Screen Logo is not selected.
Warnings and Errors Enable or disable prompts on warning and errors.
• Prompt on Warnings and Errors (default)
• Continue on Warnings
• Continue on Warnings and Errors
Table 12. System setup options—Virtualization Support menu
Virtualization Support
Virtualization Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology.
By default, Enable Intel Virtualization Technology is selected.
VT for Direct I/O Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology for Direct I/O.
By default, Enable VT for Direct I/O is selected.
Table 13. System setup options—Wireless menu
Wireless
Wireless Device Enable Enable or disable internal wireless devices.
• WLAN/WiGig (default)
• Bluetooth (default)
Table 14. System setup options—Maintenance menu
Maintenance
Service Tag Display the Service Tag of your computer.
Asset Tag Create a computer Asset Tag.
SERR Messages Control the SERR message mechanism. Some graphics cards require the SERR
message.
By default, Enable SERR Messages is selected.
BIOS Downgrade Control flashing of the system firmware to previous revisions.
By default, Allow BIOS Downgrade is selected.
Data Wipe Enable to securely erase data from all internal storage devices.
By default, Wipe on Next Boot is not selected.
BIOS Recovery Enable the user to recover from certain corrupted BIOS conditions from a recovered
file on the user primary hard drive or an external USB key.
By default, BIOS Recovery from Hard Drive is selected.
First Power On Date Set the date on which the computer is switched on (for ownership record).
By default, Set Ownership Date is not selected.
74 System setup
To Next Page
Loading...
