Identifier GUID-690FF12D-2581-4326-8270-C4B813388FD3
Status Released
Replacing the camera
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-31BF8C66-2007-41D8-BAAA-895F2E8EBD9C
Status Released
Procedure
1 Connect the camera cable to the camera module.
2 Using the alignment post, adhere the camera module on the display back-cover and antenna assembly.
45
Replacing the camera 105
To Next Page
Loading...
