3 Place the touchpad bracket into the slot on the palm rest and keyboard assembly.
4 Replace the two screws (M2x2) that secure the touchpad bracket to the palm rest and keyboard assembly.
5 Adhere the tape that secures the touchpad to the palm rest and keyboard assembly.
6 Slide the touchpad cable into its connector on the system board and close the latch to secure the cable.
Identifier GUID-56AA2BC3-6EFC-43DA-A65A-1B08AC611390
Status Released
Post-requisites
1 Replace the battery.
2 Replace the base cover.
Replacing the touchpad
59