3 Replace the four screws (M2.5x4) that secure the display hinges to the system board and I/O board.
4 Route the display cable through the routing guides on the palm-rest and keyboard assembly.
5 Connect the display cable to the system board.
6 Adhere the antenna cables to the system board.
Identifier GUID-5C9B0CEC-8A75-4661-B4E8-541F79C41E71
Status Released
Post-requisites
1 Replace the fan.
2 Replace the wireless card.
3 Replace the base cover.
74
Replacing the display assembly
To Next Page
Loading...
