Identifier GUID-CC648B28-FBF9-4A6F-BB11-4C6C2FA3D08A
Status Released
Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then
place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when
the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a
component.
NOTE: Screw color may vary with the conguration ordered.
Table 1. Screw list
Component Secured to Screw type Quantity Screw image
Base cover Palm-rest and keyboard
assembly
M2.5x4 6
Battery System board M2x3 4
Display panel Display back-cover and
antenna assembly
M2x2.5 4
Fan System board M2x5 2
Hinges Palm-rest and keyboard
assembly
M2.5x4 4
Hinge brackets Display back-cover and
antenna assembly
M2.5x2.5 6
Hinge brackets Display back-cover and
antenna assembly
M2x2 2
I/O board Palm-rest and keyboard
assembly
M2x2 2
Power-button Palm-rest and keyboard
assembly
M2x3 2
Power button with
ngerprint reader
(optional)
Palm-rest and keyboard
assembly
M2x3 2
Solid-state drive System board M2x3 1
5
Screw list 15
To Next Page
Loading...
