Identifier GUID-2596AFC0-F1E8-4A0E-A603-7D2CFE582ECE
Status Released
Replacing the fan
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-FBA79CAF-AB2B-4E55-BB9F-B66FE9B92D3D
Status Released
Procedure
1 Align the screw holes on the fan with the screw holes on to the palm rest and keyboard board assembly.
2 Route the display cable through the routing guides on the fan.
3 Replace the three screws (M2.5x5) that secure the fan to the palm rest and keyboard board assembly.
4 Connect the fan cable to the system board.
17
40 Replacing the fan
To Next Page
Loading...
