Identifier GUID-2850CA15-9CEF-415A-ADAA-1614E65C491B
Status Released
Removing the display back-cover and antenna
assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-430D15F5-B89A-4521-94BC-9786FDC78687
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
3 Remove the fan.
4 Remove the display assembly.
5 Remove the display bezel.
6 Remove the camera.
7 Remove the display panel.
8 Remove the display hinges.
9 Remove the display cable.
Identifier GUID-57B3CAC3-E6CA-489D-8C4C-D9C471A97C0C
Status Released
Procedure
After performing all the above steps, we are left with the display back-cover and antenna assembly.
52
120 Removing the display back-cover and antenna assembly