Identifier GUID-166DA787-661F-4E60-8975-5E84EDB0868D
Status Released
Removing the display cable
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-F4533516-1F76-439F-89C6-2C6361954C8A
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the fan.
3 Remove the wireless card.
4 Remove the display assembly.
5 Remove the display bezel.
6 Remove the camera.
7 Remove the display panel.
8 Remove the display hinges.
Identifier GUID-19A93D26-32C3-4FBB-874E-FB52E150743C
Status Released
Procedure
1 Remove the camera cable and the display cable from the routing guides on the display back-cover and antenna assembly.
2 Lift the camera cable and the display cable o the display back-cover and antenna assembly.
50
116 Removing the display cable
To Next Page
Loading...
