Identifier GUID-35D5032D-9652-403C-9A8A-F98FFABA8776
Status Released
Removing the power-adapter port
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-5C699FFD-CEA2-401A-94C5-BC49BBB06ED6
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the memory modules.
4 Remove the wireless card.
5 Remove the fan.
6 Remove the heat sink.
7 Remove the solid-state drive/Intel Optane.
8 Remove the hard drive.
9 Remove the display assembly.
10 Remove the system board.
Identifier GUID-D5AF4626-7846-4D75-A653-30015F342B62
Status Released
Procedure
1 Remove the screw (M2x2) that secures the power-adapter port to the palm rest and keyboard assembly.
2 Peel o the power-adapter port cable from the palm-rest and keyboard assembly.
3 Lift the power-adapter port, along with its cable, o the palm rest and keyboard assembly.
38
90 Removing the power-adapter port
To Next Page
Loading...
