Identifier GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Status Released
Removing the display assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-2F418431-DC89-4092-932D-7ADCE3D6EC3A
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
3 Remove the fan.
Identifier GUID-FA1DE748-9C76-49B1-A0FE-68276D6D5D1F
Status Released
Procedure
1 Note the routing of the antenna cables and peel o the cables from the system board.
2 Open the latch and disconnect the display cable from the system board.
3 Remove the display cable from the routing guides on the palm-rest and keyboard assembly.
4 Remove the four screws (M2.5x4) that secure the left and right hinges to the system board and I/O board.
30
68 Removing the display assembly
To Next Page
Loading...
