3 Connect the power-adapter port cable and speaker cable to the system board.
4 Slide the power-button board cable into the connector on the system board and close the latch to secure the cable.
5 Slide the nger-print reader cable into the connector on the system board and close the latch to secure the cable.
6 Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable.
7 Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable.
8 Slide the touchpad cable into the connector on the system board and close the latch to secure the cable.
9 Slide the keyboard back-light cable into the connector on the system board and close the latch to secure the cable.
10 Slide the keyboard cable into the connector on the system board and close the latch to secure the cable.
11 Connect the speaker cable to the system board.
Replacing the system board
83
To Next Page
Loading...
