Removing and Installing Parts 117
10
Place the card in the connector and press down firmly. Ensure that the card
is fully seated in the slot.
11
Replace the card retention bracket ensuring that:
• The guide clamp is aligned with the guide notch.
• The tops of all cards and filler brackets are flush with the alignment bar.
• The notch in the top of the card or filler bracket fits around the
alignment guide.
1 PCI Express x16 card 2 securing tab 3 PCI Express x1 card
4 PCI Express x1 card slot 5 PCI Express x16 card slot
1
5
2
3
4
book.book Page 117 Monday, December 10, 2007 3:12 PM
To Next Page
Loading...
