118 Removing and Installing Parts
12
Fix the card retention bracket by replacing and tightening the screw.
13
Connect any cables that should be attached to the card.
See the documentation for the card for information about the card’s cable
connections.
NOTICE: Do not route card cables over or behind the cards. Cables routed over the
cards can prevent the computer cover from closing properly or cause damage to
the equipment.
1 alignment guide 2 filler bracket 3 alignment bar
4 card retention bracket 5 guide clamp (2) 6 guide notch (2)
1
2
3
4
5
6
book.book Page 118 Monday, December 10, 2007 3:12 PM
To Next Page
Loading...
