a Disconnect the power switch cable from the power switch board [1].
b Remove the two M.2x3 screws that secure the power switch board on the computer [2].
c Lift the power switch board away from the computer [3].
Installing power switch board
1 Align the screw hole on the power switch board with the screw holders on the slot of the computer.
2 Replace the two M2x3 screws that secure the power switch board to the computer.
3 Connect the power switch cable to the connector on the power switch board.
4 Install the:
a battery
b base cover
5 Follow the procedure in After working inside your computer.
Audio board
Removing audio board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
Disassembly and reassembly
19
To Next Page
Loading...
