Dell Latitude 3190 2-in-1 - Installing Speakers; Display Assembly; Removing Display Assembly

Installing speakers
1 Place the speakers into the slots on the computer.
2 Route the speaker cable through the retention clips through routing channel.
3 Ax the adhesive tape to secure the speaker cable on the computer.
4 Connect the speaker cable to the connector on the system board.
5 Install the:
a battery
b base cover
6 Follow the procedure in After working inside your computer.
Display assembly
Removing display assembly
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
3 To remove cables:
a Remove the M2x3 screw [1] and lift the metal bracket that secures the WLAN card on the system board [2].
b Disconnect the WLAN cables [3].
c Remove the two M2x3 screws [4] and lift the metal bracket that secures the display cable on the computer [5].
d Lift the latch, and disconnect the cable [6].
Disassembly and reassembly
27