Dell Latitude 3190 2-in-1 - Installing Power Connector Port; Coin-Cell Battery; Removing Coin Cell Battery

Installing power connector port
1 Insert the power connector port into the slot on the computer.
2 Replace the two M2x3 screws that secure the power connector port to the computer.
3 Connect the power connector cable to the connector on the system board.
4 Install the:
a battery
b base cover
5 Follow the procedure in After working inside your computer.
Coin-cell battery
Removing coin cell battery
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
3 To remove the coin cell battery:
a Disconnect the coin cell battery cable from the connector on the system board [1].
24
Disassembly and reassembly