Installing display back cover
1 Align the display back cover with the tabs on the computer, and press it until it clicks into place.
2 Follow the procedure in After working inside your computer.
System board
Removing system board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c SSD card
3 Disconnect the following cables:
a sensor cable [1]
b Remove the screw that secures the camera cable to the system board and peel o the adhesive to release the cable from the
system board [2]
c world facing camera cable [3]
d coin cell battery cable [4]
e power board and audio cable [5]
f speaker cable [6]
g keyboard cable [7]
h touch pad cable [8]
32
Disassembly and reassembly
To Next Page
Loading...
