Installing the micro-secure digital card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the micro-secure digital card and provide a visual representation of the installation
procedure.
Steps
Slide the micro-secure digital card into the micro-secure digital card slot until it clicks into place.
Next steps
1. Follow the procedure in After working inside your computer.
Base cover
Removing the base cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
About this task
The following images indicate the location of the base cover and provide a visual representation of the removal procedure.
14
Removing and installing components
To Next Page
Loading...
