SmartCard module
Removing smart card reader board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c hard drive assembly
d SSD card
e SSD with holder
f SSD frame
g WLAN card
h WWAN card (optional)
i chassis frame
3 To release the smart card reader board:
a Lift the latch and disconnect the smart card reader board cable from the connector [1].
b Peel the cable from the palmrest [2].
4 To remove the smart card reader board:
a Remove the 2 (M2x3) screws that secure the smart card reader board to the palmrest [1].
b Slide and lift the smart card reader from the slot in the system [2].
28
Removing and installing components
To Next Page
Loading...
