Steps
1. Remove the (M2x3) screw that secures the WLAN card holder to the system board.
2. Remove the WLAN card holder.
3. Disconnect the antenna cables from the WLAN card.
Table 2. Connectors on the wireless card
Antenna Cable Color
Main (white triangle) White
Auxiliary (black triangle) Black
4. Slide and remove the WLAN card from the WLAN card slot.
Installing the WLAN card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the installation procedure.
Removing and installing components
43
To Next Page
Loading...
