Dell Latitude 7330 Rugged Extreme - Display Back-Cover; Removing the Display Back Cover

Display back-cover
Removing the display back cover
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the battery.
3. Remove the primary M.2 2280 solid state drive or primary M.2 2230 solid state drive.
4. Remove the keyboard.
5. Remove the base cover.
6. Remove the RF switch board.
7. Remove the WLAN card.
8. Remove the WWAN card.
9. Remove the dock I/O board.
10. Remove the rear I/O board.
11. Remove the express card reader.
12. Remove the inner frame.
13. Remove the GPS board.
14. Remove the smart card reader.
15. Remove the smart card reader I/O board.
16. Remove the fan.
17. Remove the heat-sink (UMA)
18. Remove the system board.
19. Remove the display assembly.
20. Remove the display bezel.
21. Remove the camera.
22. Remove the display hinges.
23. Remove the display cable.
About this task
The following images indicate the location of the display back cover and provide a visual representation of the removal
procedure.
Removing and installing components
99